View and Download Dixell XR30CX installation and operating instructions online. Hot Key for quick and easy programming.Keyboard with direct access to the main functions.Anti-sweat heater management through a ”DEW POINT”.Energy consumption reduction thanks to ECI fan management via PWM or 0÷10V output.Energy saving through case optimization with auto-adaptive control of superheat.Low environmental impact (CO2, R407C and R407F compatible).Optimized management of stepper or pulse electronic expansion valves.Efficient case control thanks to device synchronization (up to 8) by local LAN.Probe selection for Condenser Alarm: 0= nP=No Probe selected 1= P1=Probe 1 2= P2=Probe 2 3= P3=Probe3 *normally P3 would be used* Low temperature alarm of condenser: (-55 to 150☌ or -67 to 302☏) when this temperature is reached, the HA2 alarm will be raised (after the Ad2 delay time has expired).Housing self-extinguishing ABS Case CH keyboard: frontal 38x80mm depth 23mmT keyboard: frontal 38x185mm depth 23mmD, K: frontal 110x140mm depth 48mm Mounting CH keyboard: panel mounting in a 29x71mm cut-outT keyboard: panel mounting in a 31x150mm cut-outD, K: DIN Rail or wall mounting through integrated brackets Front protection Keyboard CH, T: IP65 Connections screw terminal block. Installation and Operating Instructions Regulation restart with door open alarm: 0= n = no 1= Y = yes, regulation will restart after “door open” alarms.Third probe calibration: (-12.0 to 12.0☌ or -21 to 21☏) adjustment for third probe offset. Pb3”) Input operates as digital input 1= Y = present, the third input (the one signed with label “D.I. Home: About us: Product selection by applications: Sitemap/Support /Links: Contact us. XR06CX Network Router pdf manual download. DIGITAL CONTROLLER WITH DEFROST AND FANS MANAGEMENT. View and Download Dixell XR06CX operating manual online. This manual s part of the product and should be kept near ttÞ imtwment for easy and quick reference The insrument not be used for purposs differA1t from those descrit:ed hereunden It cannot be used as a safety device. DIXELL® XR20C CONTROLLER - PG 1 of 4 NOTE: YOUR CONTROLLER MAY NOT HAVE EVERY. These digital controllers, available in split version, optimized the management of stepper or pulse electronic expansion valves, are compatible with low GWP refrigerant (CO2, R407C, and more) and guarantees high energy saving through case optimization. Dixell Electronics XM600 The XM600 Series is designed for multiplexed cabinet applications. Installation and Operating Instructions Third probe presence (probe named Evap.2 on the label): 0= n = not present, the third input (the one signed with label “D.I.ĭownload Ao No Exorcist Episode 2 Sub Indo.Probe Selection for first defrost cycle (Maximum) duration of defrost: (0 to 255min) time duration of a defrost cycle when only one probe is in use, or defrost time out override when second (evaporator) probe is in use. Used to stagger defrosts between multiple systems. Installation and Operating Instructions Delay start of defrost: (0 to 255min) delay between reaching the defrost interval time (as defined by parameter idF) and when a defrost cycle actually starts.1 = on/off Heating thermostat – 1 relay & 1 probe 2 = Combined thermostat with off cycle defrost timer –. PARAMETERS, FUNCTIONS IN DETAIL Table 4: controller parameters in detail Display visualisation Description Type of Controller: tells the Universal-XR which type of controller it will be operating as.Īrya Samaj Vedic Sandhya Pdf. Installation and Operating Instructions 5.Installation and Operating Instructions Description Label Adjustment Range No (0) = No change FAn (1) = Fan off Door open – compressor / fan status CPr (2) = Compressor off F_C (3) = Compressor & Fan off Alr (0) = Alarm db (1) = Dead Band.At defrost start Display during defrost sEt (2) = Set Point dEF (3) = “DEF”. Installation and Operating Instructions Description Label Adjustment Range Maximum duration of defrost 0 to 255 min (second evaporator) Defrost termination temperature (second 8.0☌ 8.0☌ -55 to 50C evaporator) 46☏ 46☏ -67 to 122☏ Rt (0) = Real temp.Once the program is completed you may want to save the parameter map to a Hot Key. After setting “tC”, it will be possible to modify all the other relevant parameters.

Dixell cx 660 manual